Fast & international delivery | 30-day money back guarantee.
Service & Support

Installation & User Manual – located here

Two PDF Versions (autobimini and autobimini lite)

QUICK SELF HELP autobimini

1. I cannot get the actuators to move, what is wrong?

1A: First step is to try UP/DOWN on the FOB, Bluetooth, Keypad and Switch to see if all sources are the same response. Second step is to download the manual and review the Troubleshooting page and corresponding manual operating procedures.

Next step is review Diagnostics page in the Bluetooth APP.  Press UP or DOWN to see if you are getting voltage and current to the motors or if there is a fault.  Make sure the terminals and wires inside the controller are tight and secure.  Check to ensure you have battery power.

2. Why do the actuators only move a short distance and then stop?

2A: The actuators are not synchronized and the controller will not allow them to move freely without synchronization.

Synchronize the actuators using the Auto Stop setting procedure in the manual.  Check the Bluetooth APP Diagnostics to see if there is a fault on the motor encoder feedback.  If there is a fault, check to ensure the wiring inside the controller enclosure is tight and secure.

QUICK SELF HELP autobimini lite

1. I cannot get the actuators to move, what is wrong?

1A: autobimini lite operates by sending 12VDC battery power through a reversing contactor to the two actuators simultaneously. The reversing contactor is actuated UP or DOWN by a switch. Download the manual and check the wiring and installation to ensure tight and secure.

Have Questions?

If you have questions, you can contact us at:

Phone: 612-701-0711

Support Form:

Shopping cart close